Raisecom RC514-FE User Manual download pdf (Page 4)

Beijing Raisecom Science & Technology Co., Ltd.

2. Overview

2.1. Introduction

RC513/514 series remote-end managed, bandwidth adjustable Ethernet media

converters are new generation media converters developed by Raisecom.

The remote-end management means that the network administrators can manage both

the host-end and the remote-end equipments to conduct such operations as working

status review, equipment control, loop-back test, and data flow statistics, etc.

The bandwidth adjustment means that the administrator can adjust the sending and

receiving bandwidth of copper ports by N X 32kbps.

Operations to host-end equipment are as follows:

1. Working status review of host-end equipment:

The working status that can be reviewed is:

a. Copper port: upstream link, port ON/OFF, auto-sensing, full/half

duplex;

b. Fiber port: link receive (RLK), link transmit (TLK), port ON/OFF;

c. Others: Fault-pass-through enable/disable, management status of

remote-end equipment, loop-back test status, loop-back test success report,

configuration application.

2. Configuration of host-end equipment:

The configurable items include:

Copper port auto-negotiation, copper port duplex mode, copper port ON/OFF,

Fault-pass-through enable/disable, remote-end management functions, reset of copper

and fiber port, loop-back test enable and forbid, sending and receiving bit rate at N x

32kbps.

Operations to remote-end equipment are as follows:

1. Working status review of remote-end equipment:

The working status that can be reviewed is:

a. Copper port: link up, port ON/OFF, auto-sensing, full/half duplex;

b. Fiber port: link receive (RLK), link transmit (TLK);

c. Others: fault pass through enable, abnormal upper/lower limit of power

voltage, feedback to configuration application, temperature of chassis

ambience.

2. Configuration of remote-end equipment:

The configurable items include:

Copper port auto-negotiation, copper port duplex mode, copper port ON/OFF,

Fault-pass-through enable/disable, reset of copper and fiber port, sending and receiving

bit rate at N*32kbps.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Raisecom RC514-FE User Manual Page 4